Standard Configuration for Mobile Command and Medical Clinics

CommTech Systems Inc.

 Specifications: 40’- 36’ MOBILE MEDICAL CLINIC

Continued

 

WITH (2) TWO SLIDE-OUT ROOMS

Text Box: YEAR 2009 MODEL 40’ or 36’ CUSTOM DESIGNED MOBILE MEDICAL CLINIC. Dimensions following based on 40 foot chassis: EXTERIOR: 100” WIDE BODY WITH 96” INTERIOR WIDTH. 84” INTERIOR HEIGHT. BUS TYPE CLASS A STYLE APPEARANCE. 100% WELDED STEEL STRUCTURE. 1 ½ SQUARE STEEL TUBE. VACUUM BONDED SMOOTH HIGH GLOSS FIBERGLASS WALLS WITH BLOCK FOAM INSULATION. (.062 THICK FIBERGLASS). ONE PIECE LAMINATED ROOF WITH RUBBER EXTERIOR AND ALUMINUM RADIUS CORNERS. TINTED LAMINATED SAFETY GLASS WINDSHIELD. LAMINATED FLOOR WITH BLOCK FOAM INSULATION AND GALVANIZED UNDERBELLY. Floor system, Sidewalls & Rear End Wall systems, and Sub-Roof systems individually vacuum bonded for a minimum of two hours to assure structural rigidity. FLOOR: 30-gauge (.010”), galvanized steel, cleated belly skin, glued to 1/8” luan plywood, glued to 1” x 3” wood frame with ¾” block foam insulation; glued to 7/16” OSB jumbo sheet, covered with .08”thick (min.) “Nora Rubber-CUSHIONED floor covering. WALLS: 1” x 1-1/2” rectangular steel tube frame with “mig” welded connections. Interior walls to be 5/32” luan with epoxy glued, washable, vinyl-clad decorative surface. Exterior wall to be “Fabwell” 1/8” luan with a continuous piece of 1/8” high-gloss, smooth, fiberglass wall panel. Color to be “polar white”. FRONT CAP: Molded fiberglass with “polar white” gel coating. Radiator opening to have 7.5 SqFt. of open area. Easy access, single panel, hood for quick check of engine fluids. Front bumper: integrally molded into front end cap, with steel reinforcement secured to chassis frame. SUB-ROOF: 1” x 1-1/2” rectangular steel tube frame with “mig” welded connections. Interior Side -Two layers of 1/8” luan plywood offset and glued to “Foss” dyed polyester polypropylene fiber interior headliner. 1” thick block foam insulation. Roof Side - 1/8” luan plywood roof panel. MAIN ROOF: Tapered roof rafters to be fastened to sub-roof along with ½” plywood support panels for roof vents, A/C vents, duct framing. Rafters and framework to be covered with two sheets of 5/32” laminated roof panel. Roof panel assembly glued and covered with a continuous piece of HIGH QUALITY FIBERGLASS. Awning rail on RH side of vehicle. CHASSIS: Workhorse (Gasoline), V-8 GM Vortec 8100. 340 HP @4200 RPM, 22.5” Tires and Wheels, Allison 2100 Series, Automatic 6 speed, 75-Gallon Fuel Tank with Generator Take Off GVWR 24,000 LBS. FRAME 5/16” X 2.75” X 9.1/8” STEEL. BUMPER 7” PAINTED STEEL C-CHANNEL. ENGINE: Workhorse (Gasoline), V-8 GM Vortec 8100. 340 HP @4200 RPM HORSEPOWER: NET. 340 TORQUE: 560 LB/FT. AT 1600 RPM. WHEELBASE: 242”. RADIATOR: 750 SQ. INCH DOWN FLOW. BLOCK HEATER: PHILLIPS 750 WATT 115V WITH THERMOSTAT. SUSPENSION: FRONT – 10,000 LBS. TAPERLEAF FRONT SUSPENSION.MERITOR 15 X 5 Qt CAM FRONT AIR BRAKES. REAR – AIRLINER 18,000.00 REAR SUSPENSION (RS 17) AXLES FRONT – MERITOR FD 965 FRONT AXLE @10,000 LBS. REAR – MERITOR RS17-144 REAR AXLE @ 17,500 LBS. STEERING: TRW TAS-65 POWER STEERING. TRW POWER STEERING PUMP WITH 2 QUART POWER STEERING RESERVOIR. EXHAUST: SINGLE HORIZONTAL MUFFLER. EXIT SIDE OF CHASSIS. BATTERY (S): TWO ALIANCE 1131 MF 1900 CCA BATTERIES. HOUSE BATTERIES: DUAL HEAVY DUTY 12 VOLT DEEP CYCLE BATTERY SYSTEM. AUXILARY BATTERY DISCONNECT SWITCH LOCATED IN DRIVER COMPARTMENT. ALTERNATOR: LN 12V 200 AMP 4940 TRANSMISSION: ALLISON 2100 MH SERIES AUTOMATIC SIX SPEED. FUEL TANK : 75 - GALLON CAPACITY TANK MOUNTED BETWEEN REAR FRAME RAILS. TIRES FRONT: MICHELIN XZE 255/70R22.5 16 PLY RADIAL REAR: MICHELIN XZE 255/70R22.5 16 PLY RADIAL SPARE TIRE SAME SZE AND SHIPPED LOOSE. WHEELS: ACCURIDE 29028 22.5 X 7.50 10 HOLE HUB. BRAKES: AIR BRAKE PKG. WABCO AIR PKG. 4S/4M ABS W/O TRACTION CONTROL. MIDLAND PURE AIR PLUS AIR DRYER. INSTRUMENTATION: ELECTRONIC SPEEDOMETER, SEVEN-DIGIT ODOMETER, HIGH-BEAM INDICATOR, VOLTMETER, FUEL LEVEL, OIL PRESSURE AND WATER TEMPERATURE GAUGES, DIRECTIONAL SIGNAL LIGHTS, CRUISE CONTROL. WARNING SYSTEM BRAKE WARNING LIGHT ENGINE WARNING LIGHT TEMPERATURE WARNING LIGHT VOYAGER COLOR TRI-VIEW BACK-UP SYSTEM WITH TILT CAMERA AND NIGHT VIEW. THIS SYSTEM PROVIDES THREE CAMERA VIEWS. THE 7” WIDESCREEN LCD MONITOR HAS A BACKLIT BUTTON, BUILT-IN SPEAKER, BRIGHTNESS CONROL, AND SUN VISOR. MAGNADYNE BU2000 EXTERNAL REVERSE MOTION WARNING ALARM. GENERATOR: 13.0 KW KOHLER POWER QUIET GENERATOR WITH INSULATING SOUND SHIELD. MODEL/HDCAB. GENERATOR TO TAKE FUEL FROM CHASSIS FUEL TANK. AUTOMATIC SHUT-OFF OF GENERATOR AT ¼ TANK FUEL LEVEL. EMERGENCY START JUMP SWITCH BETWEEN GENERATOR BATTERY AND CHASSIS BATTERY. GENERATOR COMPARTMENT TO BE VENTED AND SOUND DAMPENED. GENTURIâ GENERATOR EXHAUST SYSTEM. BODY DRIVER COMPARTMENT SPECIFICATIONS: STORAGE COMPARTMENT ABOVE DASH. DATA/COMMUNICATIONS CENTER LOCATED IN OVERHEAD CABINET ABOVE DASH. BACK-UP CAMERA WITH DASH MOUNTED MONITOR. 12 VOLT PLUG. TEXTURED MOTOR COVER WITH SMALL REMOVABLE TABLE. BUCKET SEATS WITH SWIVEL AND RECLINE, ARMRESTS, THREE-POINTSEAT BELTS WITH RETRACTORS, ULTRA-LEATHER UPHOLSTERY. SUN VISORS. WRAP AROUND WINDSHIELD CLOSE-OFF CURTAIN. DRIVER SIDE DOOR WITH TOE KICK AND STAINLESS STEEL HANDLE. BULKHEAD WALLS WITH POCKET DOOR SEPARATING FRONT CAB AREA FROM FIRST EXAM ROOM. PIONEER IN-DASH NAVIGATION A/V RECEIVER AND CD PLAYBACK AND ADVANCED VOICE CONTROL. BODY: INTERIOR SPECIFICATIONS: SOUND ABSORPTION HEADLINER FRONT TO BACK. VINYL PANEL COVERED WALLS FOR EASY CLEANING. (CUSTOMER TO SELECT COLOR) THREE FIRE EXTINGUISHERS. ONE SMOKE DETECTOR, AND ONE CARBON MONOXIDE DETECTOR. MASTER CONTROL PANEL LOCATED IN CAB AREA BEHIND DRIVER SEAT. AUXILIARY BATTERY DISCONNECT SWITCH. MEGANITE ACRYLIC SOLID SURFACE ANTI-BACTERIAL COUNTERTOPS AND WILSONART CABINETS. (CUSTOMER TO SELECT COLORS). (OR EQUIVELANT) GREENGUARD CERTIFIED WILSONART CABINETS WITH POSITIVE SECURE DOOR LATCHES. ALL OVERHEAD CABINETS WITH LOCKABLE STORAGE. ONE FILE DRAWER SIZE DRAWER IN EACH EXAM ROOM. (FONT EXAM ROOM (TBD) MAY NOT ACCOMMODATE THIS REQUEST) ALL CABINETS, DOORS, AND DRAWERS TO HAVE SOUTHCO LATCHES AND EUROPEAN HIDDEN HINGES. ALL OVERHEAD CABINET DOORS (EXCEPT FRONT DASH) TO HAVE EASY LIFT GAS STRUTS. ALL CABINET WOOD WILL BE FSC (FORESTRY STEWARDSHIP CERTIFIED) CERTIFIED FROM THE VENDORS FACTORY. HON® 700 SERIES 5 DRAWER LATERAL FILE CABINET LOCATED BETWEEN HANDI-FLIP SEAT AND BATHROOM WALL IN CENTER INTAKE AREA. PAPER CUBBY ABOVE FILE CABINET IN CENTER INTAKE AREA. SHELVES TO HAVE LIP TO PREVENT PAPER FROM SLIDING OUT. APPROX. 6’ X 2’ SLIDE-OUT ROOM LOCATED IN CENTER INTAKE AREA WITH SMALL VINYL BENCH SEAT, DESK, AND COUNTER TOP WITH DRAWERS BELOW. BENCH SEAT TO HAVE LAP STYLE SEAT BELTS. APPROX. 8’ X 2’ SLIDE OUT ROOM LOCATED IN REAR EXAM ROOM WITH BUILT-IN SMALL DESK AND COUNTERTOP. OVERHEAD CABINETS ABOVE DESK AND COUNTERTOP. ONE ENOCH EXAM TABLE #71 WITH MATCHING #92 STOOL. EXAM TABLE TO BE LOCATED IN FRONT EXAM ROOM. ONE ENOCH POWER 6000 EXAM TABLE WITH MATCHING #92 STOOL. EXAM TABLE TO BE LOCATED IN REAR EXAM ROOM. ONE (1) FREEMAN HANDI-FLIP SINGLE LOW-BACK SEAT WITH SEAT BELT POSITIONED NEXT TO FRONT ENTRY DOOR. THIS SEAT LOCKS IN THE UPRIGHT POSITION. ONE (1) FREEMAN HANDI-FLIP DOUBLE LOW-BACK SEAT WITH SEAT BELTS POSITIONED IN REAR EXAM ROOM ALONG PASSENGER SIDE WALL. THIS SEAT LOCKS IN THE UPRIGHT POSITION. (1) BUILT-IN VINYL BENCH SEAT WITH SEAT BELT LOCATED IN FRONT EXAM ROOM. (1) BUILT-IN VINYL BENCH SEAT WITH SEAT BELT LOCATED IN CENTER SLIDE-OUT ROOM. SCALE STORAGE BRACKETS LOCATED IN FRONT EXAM ROOM AND CENTER INTAKE ARE BESIDE HANDI-FLIP SEAT. CUSTOMER SUPPLIED OXYGEN BOTTLE TO BE SECURED IN REAR EXAM ROOM. (2) HON MODEL 5903 TASK CHAIR WITH ARMS 4-IN-ONE PRINTER STANDARD WALL CLOCK (QTY. 2) EACH EXAM ROOM TO HAVE A SMALL DRY ERASE/CORK BOARD. THREE 13,500 BTU ROOF AIR CONDITIONERS WITH HEAT PUMPS TO BE DUCTED THROUGH THE CEILING AND CONTOLLED THROUGH MASTER CONTROL MOUNTED THERMOSTAT. 12 VOLT LIGHTING THROUGHOUT. 4 TUBE FLUORESCENT LIGHTING. EACH ROOM TO HAVE ITS OWN LIGHT SWITCH. 110 VOLT ELECTRICAL OUTLETS THROUGHOUT NOTE IF THERE IS A REQUIREMENT FOR 220.

Chassis Detail Description: